NXP Semiconductors QorIQ T1040 Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 68

NXP Semiconductors QorIQ T1040 Скачать руководство пользователя страница 67

How to Reach Us:

Home Page:

Web Support:

freescale.com/support

Information in this document is provided solely to enable system and
software implementers to use Freescale products. There are no express
or implied copyright licenses granted hereunder to design or fabricate
any integrated circuits based on the information in this document.
Freescale reserves the right to make changes without further notice to
any products herein.

Freescale makes no warranty, representation, or guarantee regarding
the suitability of its products for any particular purpose, nor does
Freescale assume any liability arising out of the application or use of
any product or circuit, and specifically disclaims any and all liability,
including without limitation consequential or incidental damages.
“Typical” parameters that may be provided in Freescale data sheets
and/or specifications can and do vary in different applications, and
actual performance may vary over time. All operating parameters,
including “typicals,” must be validated for each customer application by
customer's technical experts. Freescale does not convey any license
under its patent rights nor the rights of others. Freescale sells products
pursuant to standard terms and conditions of sale, which can be found
at the following address:

freescale.com/SalesTermsandConditions

.

Freescale and the Freescale logo are trademarks of Freescale
Semiconductor, Inc. Reg. U.S. Pat. & Tm. Off. Flexis and Processor
Expert are trademarks of Freescale Semiconductor, Inc. All other
product or service names are the property of their respective owners.

© 2015 Freescale Semiconductor, Inc. All rights reserved.

Document Number T1040RDBPAUG

Revision 0, 06/2015

«
...
65
66
67
68
»

Содержание QorIQ T1040





































































Отзывы:

Нет отзывов