NXP Semiconductors MC9S08QL4, Справочное руководство

Страница: 131 / 240

Analog-to-Digital Converter (S08ADC12V1)
MC9S08QL8 MCU Series Reference Manual, Rev. 1
NXP Semiconductors 131
Table 10-6. ADCCFG Register Field Descriptions
Field Description
7
ADLPC
Low-Power Configuration. ADLPC controls the speed and power configuration of the successive approximation
converter. This optimizes power consumption when higher sample rates are not required.
0 High speed configuration
1 Low power configuration:The power is reduced at the expense of maximum clock speed.
6:5
ADIV
Clock Divide Select. ADIV selects the divide ratio used by the ADC to generate the internal clock ADCK.
Table 10-7 shows the available clock configurations.
4
ADLSMP
Long Sample Time Configuration. ADLSMP selects between long and short sample time. This adjusts the sample
period to allow higher impedance inputs to be accurately sampled or to maximize conversion speed for lower
impedance inputs. Longer sample times can also be used to lower overall power consumption when continuous
conversions are enabled if high conversion rates are not required.
0 Short sample time
1 Long sample time
3:2
MODE
Conversion Mode Selection. MODE bits are used to select between 12-, 10-, or 8-bit operation. See Table 10-8 .
1:0
ADICLK
Input Clock Select. ADICLK bits select the input clock source to generate the internal clock ADCK. See
Table 10-9 .
Table 10-7. Clock Divide Select
ADIV Divide Ratio Clock Rate
00 1 Input clock
01 2 Input clock

2
10 4 Input clock

4
11 8 Input clock

8
Table 10-8. Conversion Modes
MODE Mode Description
00 8-bit conversion (N=8)
01 12-bit conversion (N=12)
10 10-bit conversion (N=10)
11 Reserved