MMDS05 CONFIGURATION AND OPERATION
CHAPTER 2
MMDS05 CONFIGURATION AND OPERATION
This chapter explains how to configure and use your F4EM as part of an MMDS05. For
other parts of system installation or configuration, see the MMDS05 operations manual
(MMDS05OM/D). (If you intend to use your F4EM as part of an HC05EVS system, go to
Chapter 3 for corresponding information.)
Paragraph 2.1 explains how to set F4EM jumper headers. Paragraph 2.2 explains
considerations pertaining to the MCU you emulate. Paragraph 2.3 explains remaining system
installation.
Note that you can configure a F4EM already fitted in the MMDS05 station module
enclosure. To do so, switch off station-module power, remove the top panel, then follow the
guidance of this chapter.
CAUTION
Be sure to switch off power if you reconfigure an installed EM. Reconfiguring
EM jumper headers with power left on can damage MMDS05 circuits.
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
.
..
