background image

INTRODUCTION

• MMDS05 documentation — an MMDS05 operations manual (MMDS05OM/D) and

the appropriate EM user's manual.

As mentioned, your F4EM gives the MMDS05 the ability to emulate the MC68HC(7)05F4
MCU.  By substituting a different EM, you can enable your MMDS05 to emulate an MCU
of a different series.  (Your Motorola representative can explain all the EMs available.)

Chapter 2 explains how to configure and use your F4EM as part of an MMDS05 system.
For  information  about  MMDS05  software  or  the  station  module,  see  the  MMDS05
operations manual.  For layout and configuration information pertaining to a different EM,
see the corresponding EM user's manual.

1.1.2  M68HC05EVS Evaluation System (HC05EVS)

An HC05EVS is an economical, two-board tool for designing, debugging, and evaluating target
systems based on an MC68HC05 MCU. A complete HC05EVS consists of:

• a platform board (PFB) — the bottom board, which supports the emulator module.

The platform board has connectors for power and for the terminal or host computer.

• an emulator module (EM)  — such as the F4EM: a printed circuit board that enables

system functionality for a specific set of MCUs. The EM fits onto the PFB.  The EM
has connectors for a target cable and for a cable to a logic analyzer.

• an RS-232 serial cable — the cable that connects the PFB to the host computer RS-

232 port.

• system software — software, on 3-1/2 inch diskettes.

• HC05EVS documentation — an HC05EVS operations manual (HC05EVSOM/D)

and the appropriate EM user's manual.

As mentioned, your HC05F4 EVS emulates the  MC68HC705F4  and  the  MC68HC05F4
MCUs.  By substituting a different EM, you can enable your HC05EVS to emulate an MCU
of a different series.  (Your Motorola representative can explain all the EMs available.)

Chapter 3 explains how to configure and use your F4EM as part of an HC05EVS system.
For  information  about  HC05EVS  software  or  the  platform  board,  see  the  HC05EVS
operations manual.  For layout and configuration information pertaining to a different EM,
see the corresponding EM user's manual.

 

   

  

F

re

e

sc

a

le

 S

e

m

ic

o

n

d

u

c

to

r,

 I

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

 

Freescale Semiconductor, Inc.

For More Information On This Product,

   Go to: www.freescale.com

n

c

.

..

Содержание M68EM05F4























Отзывы: