MMDS05 CONFIGURATION AND OPERATION
2.3 REMAINING SYSTEM INSTALLATION
When you have configured headers J1 to J4 and made sure that the resident MCU is
appropriate, you are through with F4EM configuration:
• To install the F4EM in an MMDS05 station module, remove the panel from the station-
module top. Fit together EM connectors P2 and P3 (on the bottom of the board) and
control-board connectors P11 and P12. Snap the corners of the EM onto the plastic
stand-offs. Connect the target cable, if appropriate. Replace the panel.
• If your F4EM already is installed in the station module, reconnect the target cable (if
necessary). Replace the panel.
At this point, you are ready to make remaining cable connections, as necessary, and restore
power. For instructions, consult the MMDS05 operations manual (MMDS05OM/D).
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
.
..
