HC05EVS CONFIGURATION AND OPERATION
3.5 REMAINING SYSTEM INSTALLATION
When you have configured headers J1to J4 and made sure that the resident MCU is
appropriate, you are through with F4EM configuration.
Find jumper header J1 of the HC05EVS platform board. Make sure that three fabricated
jumpers are installed, per the diagram below.
A14 1
2
J1
(FABRICATED
JUMPERS)
A13 3
A12 5
A11 7
4
6
8
To install the F4EM on an HC05EVS platform board, fit together EM connectors P3 and P4
(on the bottom of the board) and platform-board connectors P3 and P4. Snap the corners of
the EM onto the plastic stand-offs.
At this point, you are ready to make remaining cable connections, as necessary, and restore
power. For instructions, consult the HC05EVS operations manual (HC05EVSOM/D).
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
.
..
