NXP Semiconductors LPC55S36-EVK, Руководство пользователя, Страница: 15 / 49

Table 6. LPC55S36-EVK jumpers (continued)
Part identifier Jumper type Description Reference section
JP49 1x3 pin header Target MCU MCAN controller output pin
selection jumper:
• Pins 1-2 shorted (default setting): Target
MCU MCAN controller transmits output
through the MCU pin PIO1_2
• Pins 2-3 shorted: Target MCU MCAN
controller transmits output through the MCU
pin PIO0_30
JP56 1x3 pin header Octal flash memory voltage selection jumper:
• Pins 1-2 shorted: Octal flash memory is
powered by VCC_3V3_1V9 supply
• Pins 2-3 shorted (default setting): Octal flash
memory is powered by VCC_1V9 supply
Octal flash memory
JP63 1x2 pin header Octal flash memory reset jumper. By default,
jumper pins are open. To reset the flash
memory, short the jumper.
JP41 1x3 pin header Target MCU pin PIO0_2 I/O selection jumper:
• Pins 1-2 shorted: Target MCU pin PIO0_2
sends/receives input/output to/from jumper
JP61
• Pins 2-3 shorted (default setting): Target
MCU pin PIO0_2 sends/receives input/
output to/from Motor 2 + Arduino socket
connector J102
JP61 1x3 pin header Jumper JP41 pin 1 I/O selection jumper:
• Pins 1-2 shorted (default setting): Jumper
JP41 pin 1 sends/receives serial data to/
from octal flash memory / external flash
memory
• Pins 2-3 shorted: Jumper JP41 pin 1
provides I2C/I2S clock or sends/receives
analog signal
JP42 1x3 pin header Target MCU pin PIO0_6 input selection jumper:
• Pins 1-2 shorted: Target MCU pin PIO0_6
sends/receives input/output to/from octal
flash memory / external flash memory
• Pins 2-3 shorted (default setting): Target
MCU pin PIO0_6 sends/receives input/
output to/from Motor 2 + Arduino socket
connector J102
Table continues on the next page...
NXP Semiconductors
LPC55S36-EVK Overview
LPC55S36-EVK Board User Manual, Rev. 1, 24 January 2022
User Manual 15 / 49