NXP Semiconductors LPC55S36-EVK, Руководство пользователя, Страница: 12 / 49

Table 5. LPC55S36-EVK connectors (continued)
Part identifier Connector type Description Reference section
target MCU for an external UART
connection
J5 4-pin audio jack Audio input connector for onboard
audio codec I2S interface
J6 Audio output connector for onboard
audio codec
J44 2x12 pin header Audio expansion connector
J19 DB9 male connector High-speed CAN connector CAN interface
J45 (DNP) 2x14 pin header External flash connector Octal flash memory
J41 2x7 pin header External digital PDM microphone
(DMIC) connector DMIC and external DMIC
connector
J7 1x8 position receptacle mikroBUS socket connectors mikroBUS socket
J8
J13 2x6 position receptacle Motor 1 c unused MCU
pin socket connectors (placed on
bottom side of PCB) Motor 1 c unused
MCU pin socket
J10 2x8 position receptacle
J9 2x10 position receptacle
J12 2x8 position receptacle
J132 2x6 position receptacle Motor 2 c Arduino socket
connectors Motor 2 c
Arduino socket
J102 2x8 position receptacle
J92 2x10 position receptacle
J122 2x8 position receptacle
J38 2x10 pin header Debug (SWD) connector to connect
an external debug probe or external
debug target Supported debug
scenarios
JP31 (DNP) 1x3 pin header ADC reference connector. JP31 is
not populated on the board. If
populated, it can be used as an
access point to inject positive and
negative voltage references at its
pins 1 and 3, respectively, for the
target MCU ADC. For more information
on these connectors,
see LPC55S36-EVK
schematics
J16 (DNP) 2x5 pin header
MCU-Link SWD connector
J133 (DNP)
1x6 pin header MCU-Link GPIO header
1.8 Jumpers
The table below describes the LPC55S36-EVK jumpers.
NXP Semiconductors
LPC55S36-EVK Overview
LPC55S36-EVK Board User Manual, Rev. 1, 24 January 2022
User Manual 12 / 49