Getting started
FRDM-HB2001-EVM evaluation board
, Rev. 1.0
4
NXP Semiconductors
2
Getting started
2.1
Kit contents/packing list
The FRDM-HB2001-EVM contents includes:
• Assembled and tested evaluation board/module in anti-static bag
• FRDM-KL25Z
• Warranty card
2.2
Jump start
NXP’s analog product development boards help to easily evaluate NXP products. These tools support analog mixed signal and power
solutions including monolithic ICs using proven high-volume SMARTMOS mixed signal technology, and system-in-package devices
utilizing power, SMARTMOS and MCU dies. NXP products enable longer battery life, smaller form factor, component count reduction, ease
of design, lower system cost and improved performance in powering state of the art systems.
• Go to
• Review the Tool Summary Page
• Look for
• Download documents, software and other information
Once the files are downloaded, review the user guide in the bundle. The user guide includes setup instructions, BOM and schematics.
Jump start bundles are available on each tool summary page with the most relevant and current information. The information includes
everything needed for design.
2.3
Required equipment and software
To use this kit, you need:
• 3/16” blade screwdriver for connecting the cables
• DC Power supply: 5.0 V to 40 V with up to 20 A current handling capability, depending on motor requirements
• USB Standard A (male) to mini-B (male) cable
• Typical loads (brushed DC motor, power resistors or inductive load with up to 5.0 A and 28 V operation)
• Function generator (optional)
• FRDM-KL25Z Freedom Development Platform for SPI communication (included in KIT)
• SPIGen software from
(For using FRDM-KL25Z based SPI Dongle)
2.4
System requirements
The kit requires the following to function properly with the software:
• USB enabled computer with Windows XP or newer
Jump Start Your Design