Figure 43. LCD mounting
1. Prepare pieces of double-sided foam tape and attach them only to the corners of the LCD area in the EVK. They will
hold the LCD panel on the EVK when you will perform a test on the LCD.
Figure 44. Pasting foam tape to the EVK
2. Using a pair of tweezers, pull out the locks of the LCD connectors. Push the LCD cables into the LCD connectors on the
board. Push in the locks, securing the connection.
NXP Semiconductors
Board setup, wiring, and assembly
NXP EasyEVSE EV Charging Station Development Platform User Guide, Rev. 0, 18 March 2022
User Guide
34 / 64
