NXP Semiconductors EasyEVSE EV, Руководство пользователя

Страница: 14 / 64

Table 2. Miscellaneous hardware (continued)
Description Purpose Reference picture Example of supplier buy link
NFC Device; for example,
blank NFC Mifare or NTAG
sample cards. Tap the NFC device into
the CLRC663ARD antenna to
read its UID.
Example of a Mifare Sample
card, used for demonstration
in this guide.
For NTAG, UCODE and
ICODE sample cards, and
tags:
NXP RFID Ecosystem
Label and tag suppliers .
For Mifare sample cards:
https://www.mifare.net/en/ .
3.3 Miscellaneous tools
The below table outlines the miscellaneous hardware to use during boards preparation and assembly. It also shows alternative
and optional mounting screws for the platform assembly.
Table 3. Miscellaneous tools
Description Purpose Reference picture
Electronics diagonal cutters Cut pins on the CLRC6663 board.
Double sided foam tape
Mount firmly the LCD into the i.MX
RT106x EVK.
ESD Tweezers Aid with the installation of LDC flex
cables into the i.MX RT106x EVK
display connectors.
Soldering Iron and solder core wire Solder SPI links on the i.MX RT106x
board.
Four 2 ½ “ Standoff screws with
a diameter equal or less than the
mounting holes of the i.MX RT106x EVK They are completely optional, as their
purpose is to get clearance and
stability for all boards when they sitting
assembled in your desk.
NXP Semiconductors
Required hardware
NXP EasyEVSE EV Charging Station Development Platform User Guide, Rev. 0, 18 March 2022
User Guide 14 / 64