background image

30

eXCLUSIVe AGReeMeNT:

 To the extent permitted by state law, this 

one-year limited warranty

 is a complete 

and exclusive statement of the warranties, which apply to the nVISION TPMS; there are no express or implied 

warranties beyond those expressly stated above. No employee, agent, dealer or other person is authorized to give 

any warranties on behalf of Hopkins Manufacturing Corporation, except as authorized in writing.

STATUTe OF LIMITATIONS:

 To the extent permitted by state law, in purchasing the nVISION TPMS you agree  

that any action for breach of contract or warranty must be commenced within one year after the cause of action  

has accrued. 

PROCeDURe:

 In the event that a product failure covered by this warranty occurs while this warranty is in effect, 

Hopkins Manufacturing Corporation will, at its option, either: (a) repair the defective unit; (b) replace the defective 

unit with a new unit; or (c) replace the defective unit with a refurbished unit. Hopkins Manufacturing Corporation 

will ship your repaired, new, or refurbished unit to you without charge for parts, service, or any other cost (except 

shipping and handling) incurred by Hopkins Manufacturing Corporation or its representatives in connection 

with the performance of this warranty. Failed units covered under this warranty must be sent by you to Hopkins 

Manufacturing Corporation with shipping prepaid by the sender. You are responsible for all costs incurred in the 

removal, reinstallation, and shipping of the unit. A copy of the sales slip received by you at the point of purchase 

of the unit must accompany the returned unit. Call Hopkins Manufacturing Corporation for Warranty Return 

Authorization.

For Warranty Return Authorization

Call: hopkins Manufacturing Corporation

Toll Free: (800) 835-0129

Содержание 30100VA

































Отзывы: