NVision 30100VA, Руководство пользователя

Страница: 9 / 32

9
NORMAL OPERATION
Once you have completed programming your Memory Positions, your system
will enter normal operating mode. Your TPMS system will begin checking
your tires. You will see a series of check marks illuminate in the middle on
the right side of the display screen. These checks indicate that your TPMS
system is reestablishing the RF connections with each sensor and verifying
tire conditions. When all tire conditions report at normal levels, checking
will stop and your monitor will illuminate the green light.
If you have turned your monitor off, you will need to turn it on to begin the
normal operation mode. Note that from the off position, your TPMS system
will need to reestablish the RF signature for each sensor for the Memory
Positions last used. This process could take up to 5 minutes depending on the communication cycle of the sensors.
When the monitor reestablishes RF connections, the monitor will display a yellow light, to indicate that it has yet to
verify all tire conditions.
TIP: We recommend that once your system is operating, you leave it plugged in and turned on. This ensures that
you have a continuous monitoring of all tires. If your vehicle is to be parked for more than 30 days, we recommend
you turn the monitor off.
PSI
This is what your screen should
look like in Normal Mode.