NVision 30100VA, Руководство пользователя

Страница: 5 / 32

5
GET YOUR TPMS READY
ACTIVATe
• Before you power up your TPMS system for the first time, you will need to attach the pivoting antenna. You will
find an antenna port in the back of the monitor. Screw the pivoting antenna into the port. Be careful not to over-
tighten the antenna.
TIP:
The pivoting antenna provides flexibility and you can position to maximize signal strength from
sensors to the monitor. Also, easily pivots to fit into tight compartments in your RV.
• Insert Quick-Set
™
Installation Cord into the front of the monitor
for power. System will default to PSI. At initial start up, unit
will default to memory position #1
TIP: The Quick-Set
™
Installation Cord allows you to take the
monitor with you tire by tire for a faster and easier installation
experience.
Quick-Set
™
Installation Cord
(9-volt battery not included)
P I
V O T I N G