NVision 30100VA, Руководство пользователя

Страница: 4 / 32

GETTING STARTED
It is important to read and understand your owner’s manual. It contains valuable information
as well as tips or suggestions for getting the most from your new TPMS System.
There are 3 basic installation steps:
1. Make sure you have the correct pressure in your tires before you install the system. It is best to install the
system in the morning when your tires are cool.
2. Turn on the monitor and scroll through the vehicle options that match your exact tire configuration.
Press the button to confirm your selection.
3.
The system will ask you to install sensors one-by-one for each configuration. Locate the tire that corresponds to
the blinking tire symbol on your monitor. Screw the sensor on. When the pressure registers correctly, press .
You have established a unique electronic signature for that tire. Follow the prompts for all other tires.
Your nVISION
®
TPMS has a unique memory feature that allows you to store other configurations (trailers, vehicles,
motorhomes, etc.). Follow the same set up procedures for up to 4 different vehicles.
That’s it! Simple. Straight-forward. You’re now ready to roll….enjoy and be safe!!
4