NVision 30100VA, Руководство пользователя

Страница: 6 / 32

PSI
DeFINe MODe
When you turn your monitor on for the first time, your screen should look like
this. The “Define” Mode allows you to choose a wheel configuration that
exactly matches your vehicles and trailers.
TIP: We recommend that you program your most common driving
configurations into Memory Position 1 and 2.
Press the arrow keys to scroll through our menu of tire configurations to find
the correct configuration for your vehicle. For example, If you have a 10-wheel
motorhome scroll to this configuration
Stop on correct vehicle configuration and press to confirm selection
ReMeMBeR: Please take your monitor with you to each tire using the Quick-Set
™
Installation Cord.
NOTe:
It is critical that you place the sensor on the tire that corresponds to the
flashing tire on the monitor. The system will store this specific sensor location into
memory. If you don’t put the sensor on the corresponding tire location, the pressure
will be read and reported properly, but the display will not provide the correct tire
location.
The monitor will advance to sensor installation on the tires. You will begin with the left front
tire. Please follow the diagram below when installing the sensors for your vehicle.
6
START