144
Quadro Workstation User’s Guide
Chapter 7
Configuring Key ForceWare Graphics Driver Features
Figure 7.26
Advanced Timing — Custom Modes/Timings & Timing Standards
Display Mode & Timing Parameters
Click the
Mode & timing
list if you want to select a “custom” timing value
or
an
“EIA-861B”
timing. These settings are explained below.
Note:
If you rather use “standard” timings (such as DMT, GTF, CVT, and EDID), see
“Display Timing Standards” on page 147
in the next section.
•
Custom values
— If you are an advanced user and would prefer to enter custom
timing values in the fields provided on the Advanced Timing page, follow these
steps:
1
Select
Custom values
from the Mode & timing list and click
Apply
.
2
Enter the values you want in the various fields as described in
3
When the confirmation prompt appears, click
Yes
. Your custom settings are
now in effect.
QuadroGuide_.book Page 144 Monday, April 3, 2006 12:21 PM
