51
Example:
# mstflint -d
41
:
00.0
ww
0x10008
0x5a445a44
Writing a dword to Flash Without Sector Erase
To write one dword to Flash memory without sector erase , use the following command line:
# mstflint -d <device> wwne addr data
where:
device
The device the dword is written to..
addr
The address of the word to write.
data
The value of the word.
Example:
# mstflint -d
41
:
00.0
wwne
0x10008
0x5a445a44
Note that the result may be dependent on the Flash type. Usually, bitwise and between
the specified word and the previous Flash contents will be written to the specified address.
Erasing a Sector
To erase a sector that contains a specified address, use the following command line:
# mstflint -d <device> e addr
where:
device
The device the dword is erased from.
addr
The address of a word in the sector that you want to erase.
Example:
# mstflint -d
41
:
00.0
/mtusb-
1
e
0x1000
Querying Flash Parameters
To query flash parameters use the following command line:
# mstflint -d <device> [-ocr] hw query
where:
device
The device to query.
Example:
# mstflint -d
41
:
00.0
hw query
