Nvidia DualTV, Руководство пользователя

Страница: 19 / 119

Hardware Installation
DU-01848-001_v06 13
03/28/06
1 Connect FM antenna cable.
2 Connect TV antenna or TV cable (this connection supplies the TV signal to both tuners on the card).
If your cable is already connected to another A/V device, you can use the included “splitter” as shown
to send the cable signal to both the NVIDIA DualTV and your other device.
Connect the TV signal directly to CATV connector on the NVIDIA DualTV if you do not have a secondary
A/V device. Do not use the splitter in this case.
NVIDIA DOES NOT recommend that you connect an amplifier or active amplifier/splitter with high
gain to the TV cable input. Doing so could cause excessive noise on the signal resulting in distortion of
the TV picture.
3 For connections to set-top boxes or other A/V equipment. See next page.
Figure 3. NTSC and PAL Card Connections
(if exist)
Secure to system chassis using
any hardware removed in step 3.
NTSC
Version
PAL
Version
1
2
3
Use the splitter
only if needed