Nvidia DualTV, Руководство пользователя

Страница: 18 / 119

NVIDIA DualTV MCE User’s Guide
12 DU-01848-001_v06
03/28/06
Installing the Hardware
Note: All hardware must be installed prior to installation of the software.
Use the following procedure to install the NVIDIA DualTV tuner card into your
computer system. Use Figure 3 on the next page as a guide to connecting cables
to your NVIDIA DualTV tuner card.
1. Turn off the computer, monitor, and any peripheral equipment and
disconnect the power cord to the PC .
2. Open your computer; refer to your computer documentation for assistance.
3. Remove any metal plate that covers the PCI slot you selected on the
motherboard so the tuner card connectors are accessible from the back of the
computer (you will use the screws to secure the card).
4. Install the NVIDIA DualTV tuner card into the selected PCI slot.
5. Secure the tuner card using any hardware (screws) removed when you
removed the metal plate or an existing analog tuner card.
6. Reinstall the cover on your computer and reconnect any cables removed earlier.
7. Connect the cables to your NVIDIA DualTV tuner card (see Figure 3). If a TV
antenna or TV cable is used, attach the signal source (directly or via the included
coaxial cable splitter) to the
CATV
connector on the card. If you are connecting a
set-top box, see Connecting a Set-Top Box or Other Video Equipment on page 14.
Note: The A/V cable connection for capturing analog video output from a
camcorder or VCR is the same as that for a set-top box (see Figure 4).
Note: If you have an MCE-compatible IR remote control/receiver but have not
connected the USB IR receiver to the MCE system, please plug that in
only after the NVIDIA DualTV software installation (next chapter).
8. Reconnect the power cord to your system.
9. Power on the computer.