nVent RAYCHEM 1244-0006829, Руководство по эксплуатации и установке

Страница: 17 / 48

nVent.com | 17
5. Operator level
Parameters
Depending on the configuration, the following values are displayed:
Symbol Meaning
SP 1
Set point value 1 (can be edited)
SP 2
Set point value 2 (can be edited), only when switching
over to set point value 2 v
Chapter 7.7 “Binary functions”
SPr
Ramp set point value (only if configured)
Chapter 7.3 “Ramp function”
inP 1
Measured value of analog input 1
y
Output value
t1
Timer time (only if configured and timer is not running)
Chapter 7.5 “Timer”
tL
Timer running time (only if timer runs)
Chapter 7.5 “Timer”
tr
Residual timer running time (only if timer runs)
Chapter 7.5 “Timer”
OC
Service counter display (only if service counter runs or
as long as a reached limit value was not reset)
Chapter 7.8 “Display/Operation/Service counter”
6. Parameter level
Normal display
>2s
or timeout
Navigation principle
one level
backward
one level
forward
next/previous
parameter
F
EXIT
F
EXIT
Levels can be inhibited.
Chapter 4.4 “Defining various user levels”
Parameter level
PArA
Pb1
.
.
.
y2
PArA
OPr/USEr 1
1. Either the Operator (
OPr
) or
the User level (
USEr
) exists