nVent Hoffman RackChiller CDU800 Скачать руководство пользователя страница 9

Страница: 9 / 134

About this manual

89217391 Rev. A

2.3

Explanation of the various notes

The warning notes are preceded by signal words indicating the severity of the
hazard.

Compliance with the warning notes is imperative in order to avoid accidents,
injuries and damage to property.

Explanation of warning notices used in this manual:

DANGER

Short description of danger

The signal word

DANGER

identifies an immediately threatening danger.

Any non-adherence will result in severe injuries or death.

WARNING

Short description of danger

The signal word

WARNING

identifies a potential danger.

Any non-adherence may result in severe injuries or death.

CAUTION

Short description of danger

The signal word

CAUTION

identifies a potential danger.

Non-compliance may result in minor to medium injuries.

NOTICE

Short description

The signal word

NOTICE

identifies a potential risk of damage to property.

Non-compliance may cause damage to the unit or system.

NOTE

The signal word

NOTE

identifies further information on the unit or about its use.

Note concerning the protection of the environment

The keyword

Note concerning the protection of the environment

indicates

information concerning the protection of the environment.

Содержание RackChiller CDU800







































































































































Результаты поиска

Содержание RackChiller CDU800

Отзывы:

nVent Hoffman RackChiller CDU800, Руководство по эксплуатации и инструкция, Страница: 9 / 134

Результаты поиска

Содержание RackChiller CDU800

Отзывы: