Setting Up
36
89217391 Rev. A
©2022 nVent
9.4
Connections
9.4.1
Primary circuit
1.
Release nitrogen at drainage points (1).
Fig. 4: Drainings and tri-clamps
2.
Loosen/open tri-clamps (2).
3.
Remove and store the lids (6).
Fig. 5: Tri-clamp with pipe bend
4.
Install pipe bend (3) with seal (4) to the pipe (5).
5.
For connections from above rotate pipe bends (3) with opening to the top.
(see also Figure Connection possibilities)
6.
For connections from below rotate pipe bends (3) with opening to the bottom
and remove cover in bottom of the housing. (see also Figure Connection
possibilities)
7.
Install tri-clamp (2) and fasten/close it.