Set Up Your Device
Instruction for Use
1.
Press “
On/+
” button to power on and start working procedure, the instrument enters into
automatic combination mode 5 (intensity is 1st level, timing for 15 minutes), LCD displays
corresponding contents.
2.
Press
“On/+”
button after the instrument has been powered on to enhance intensity
which is divided into 9 levels. Intensity is initially set to 1st level (the weakest) by default,
LCD will display corresponding contents.
3.
Press
“Off/
-
”
button to weaken the intensity which is divided into 9 levels. When the
intensity is set to 1st level (the weakest), one more press of the “Off/
-
” button will sh
ut
down the instrument.
4.
Press
“Auto”
button to choose from 5 automatic combination modes which can
automatically and circularly operate 3 manual treatment modes. Choose different
combination treatment modes according to different treated areas, which are (1) waist, (2)
leg and foot and (5) shoulder.
5 automatic combination modes include (i) Cycles of Mode 1
→
Mode 2
→
Mode 4 (ii)
Cycles of Mode 2
→
Mode 4
→
Mode 5 (iii) Cycles of Mode 1
→
Mode 2
→
Mode 5 (iv)
Cycles of Mode 2
→
Mode 1
→
Mode 4 and (v) Cycles of Mode 5
→
Mode 1
→
Mode 4,
that each Mode will work for 30 seconds within each cycle.
Default setting as Mode 1. After each conversion of treatment mode, the intensity will be
back to 1st level.
5.
Press
“Manual”
button to choose from 5 manual treatment modes which included Mode
1 to Mode 5. After each conversion of treatment mode, the intensity will be back to 1st
level.
6.
Press
“Speed+”
button to accelerate the speed which is divided into 5 levels and the LCD
will display a corresponding number. When the
LCD displays “5”, it means the speed is the
fastest. Under this situation, it’s no use pressing the “Speed+” button again
7.
Press
“Speed
-
”
button to reduce the speed which is divided into 5 levels and the LCD will
display a corresponding number. When the LC
D displays “1”, it means the speed is the
slowest. Under this situation, it’s no use pressing the “Speed
-
” button again.
8.
When under automatic mode, press “Repeat” button once to lock the currently running
treatment mode and stop the cycle operation of this automatic combination mode, and
the LCD displays “Repeat”; If press the “Repeat” button again, the circulation mode
restarts and the LCD does not display “Repeat”
.
