Set Up Your Device
1.
Open battery cover and insert 2 AAA batteries into the battery
compartment according to polarity.
Caution: When the intensity stimulation is very weak, it means the
battery is low and a new battery should be replaced.
2.
Insert one end of two-core connecting cable to machine socket and
connect the other to electrode pad.
Caution: The connecting line can only be used to connect electrode
patch and the host; it is prohibited to be used for other purposes. Do
not put the connecting line around the neck in case of strangulation.
Getting Start
Tear off the protective films on electrode pads, and then paste the
electrode pads onto painful areas. Relax your body completely. Push the
power switch on the right of the host to “on” position, and press “On/+”
button to power on and start treatment. It’s recommended to use the
instrument twice a day, 15 minutes each time.
Caution:
Only use electrode pads equipped with the product.
Do not dispose the electrode patch casually. Please follow the local
environmental requirements.
Make sure well connection between electrode pad and machine, or else it
might affect the function of the product.
Pair of electrode pads can only be used by one person.
After Used
Suggested to paste those pads into the storage plate and keep in dry,
ventilated place for next use.
