26
7.2 PRESET (NO., FOCUS, IRIS, BACKLIGHT, TITLE, SAVE PRESET)
PRESET is designed to store ZOOM, FOCUS, IRIS, and BACKLIGHT, as well as the TITLE
settings to the camera memory, allowing otherwise complicated set of settings to be
recalled at a touch of a button.
Recalling the Programmed PRESET
Recall the desired PRESET by pressing the corresponding number key [1-8] followed by
the [PRESET] key. Avoid recalling a PRESET if the MOTION SETUP is already set up and
is currently running. To avoid conflict, either turn OFF the motion detection, or wait until
the area is cleared of activity.
7.3 ALARM SETUP (INPUT, OUTPUT, PRESET, HOLD TIME)
This function uses the Magnetic, PIR or other external sensor devices to signal the
camera reacting to an event.
Important:
Please program a PRESET prior to designating
ALARM action.
OSD Menu Terms & Settings
• INPUT:
Designate the dry contact relays for
ALARM input. (OFF, N/O, N/C)
• OUTPUT:
Activate the relay ON/OFF.
• PRESET:
Assign the desired PRESET for
ALARM action.
• HOLD TIME:
Determine the dwell time
of the relay output for alarm output.
(3~60sec)
• NO:
Assign a desired PRESET number
• FOCUS:
Determine the FOCUS method.
(See section 1: FOCUS SETUP)
• IRIS:
Select the desired IRIS mode.
• BACKLIGHT:
Select the desired BACKLIGHT
COMPENSATION mode.
• PRESET TITLE:
Create a PRESET TITLE to
easily identify the programmed PRESET.
NO.
FOCUS
IRIS
BACKLIGHT
TITLE
SAVE PRESET
END
PRESET SETUP
1(EMPTY)
ONE-PUSH
AUTO
OFF
PRESET 1
TYPE
INPUT
OUTPUT
PRESET
HOLD TIME(SEC.)
END
ALARM SETUP
ALARM1
OFF
ON
-
03
