27
7.4 MOTION SETUP (OPERATION, OUTPUT, PRESET, HOLD TIME, SENSITIVITY,
DETECT AREA)
The ZoomMatic™ Integrated camera has built-in motion detection that allows move
-
ment to be observed on the screen, and be set up to trigger an ALARM or PRESET to
take closer look at the subject or area being monitored.
Note:
A motion icon (running
man) appears on the screen when movement is detected.
• SENSITIVITY:
Determine the sensitivity of the motion detection. (1 Low ~ 8 High)
• DETECT AREA
:
Specific areas of the frame can be monitored for movement. A grid of
48 squares will appear. Each square can be individually turned active or inactive for
motion detection. Using the arrow navigation keys (
q
/
p
/
t
/
u
) on your remote
controller, navigate to a specific area of the screen and use the [Near or Far] focus
keys to select that square ON or OFF.
OSD Menu Terms & Settings
• OPERATION:
Activate the motion detection
ON/OFF.
• OUTPUT:
Determine whether to just display
when motion is detected, or to trigger an
ALARM response.
• PRESET:
Assign the desired PRESET for MO
-
TION action.
• HOLD TIME:
Determine the dwell time of the
MOTION output. (3~60sec)
OPERATION
OUTPUT
PRESET
HOLD TIME(SEC.)
SENSITIVITY
DETECT AREA
END
MOTION SETUP
OFF
ON
-
10
04
• Active Areas:
Clear
• Inactive Areas:
Gray
• Current Position:
Flashing Cursor
Important:
By factory default, the edges around
the frame are already inactive. You may enable
or disable the rest of the squares once motion
detection has been turned on.
