Nussbaum UNI-LIFT 5000 CLT PLUS, Инструкция по эксплуатации и документация

Страница: 49 / 56

Operating Instruction and Documentation
UNI-LIFT 5000 CLT / Plus
- 49 -
Function button:
<*> Back to the position-ad (2).
<0> ... < 9 > password input
4.2 Service-Menu
Dialed menu-point becomes through > < marked
Function button:
< * > next menu-point dials
< #> menu-point activates
The menu-point becomes >zurück < activated jumps back this to the position-ad.
4.3 STEERED
Both axes of the lift can be driven individually over the function " GESTEUERT ". The
driven axis becomes over “* “marks and demarcates and after it over „#“activates. This
function can be used only in the disturbance-case!
controlled operation - axis 1 active
The controlled business over the ad-functions is only possible if the dip-switch stands 5 on
the “Achscontroller” on “ON”!
If the dip-switch 5 is standing on “OFF”, the axe drives over the dip-switch-attitude,
independently from the ad-function.
Over the buttons < 1 >, < 2 > is dialed the axes, the steered procedures should become.
The dialed axes become on the ad through *X * marks.
If the button < lifting > or < lowering > was pressed afterwards, only the select axe can
moved.
! The installation can become destroyed.
Function button:
< * > Abortion and return into the service-menu (4.2)
< l > axe 1 activates / deactivates
< 2 > axe 2 activates / deactivates
>Gesteuert<
Achse nullen
Hubhöhe
zurück
*1* 50.3
2 0.0