Operating Instruction and Documentation
UNI-LIFT 5000 CLT / Plus
- 20 -
5.1 Lifting the vehicle
• Drive vehicle over the lift, longitudinal axes on line of the lift.
• Block the vehicle against rolling, put into gear.
• Check the dangerous places of the lift and be sure that there are no objects or
people in the immediate area of the lift or on the lift.
• Switch on the control system; main switch on position ”1” (see pic.1)
• Raise the lift. Press the button „lifting“.
• Lift the vehicle on the working height.
• Observe the complete process.
pic. 1: operation unit
main switch
button „lifting“main lift..............................Bühne
button „lowering“main lift.........................Bühne
button „lifting“wheel free lift.....................R.F.H.
button „lowering“ wheel free lift...............R.F.H.
light...............................................................Licht
equalization........................................Ausgleichen
5.2 Lowering the vehicle
• Check the dangerous places of the lift and be sure that there are no objects or
people in the immediate area of the lift or on the lift.
• Lower the vehicle to the working height or until the platform reaches the lowest
point; press the button „lowering“ .
• Before the lift reaches the lowest position, it stops (approx. 150 mm).
Let off the „lowering”. Control the dangerous places. Press the button again. You
hear an acoustic signal until the lift reaches the lowest position.
• Observe the complete process.
• Drive the vehicle out of the lift if the lift (main lift) is in the lowest position.
5.3 Lifting the vehicle with the wheel free lift
• Drive vehicle over the lift, longitudinal axes on line of the lift.
• Block the vehicle against rolling, put into gear.
• Position the polymer supports under the pick-up points which are described by the
vehicle manufacturer. Do not lay them on edge! The vehicle might fall down!
• Check the dangerous places of the lift and be sure that there are no objects or
people in the immediate area of the lift or on the lift.
• Switch on the control system; main switch on position ”1” (see pic.1)
• Raise the lift. Press the button „lifting“ (R.F.H.)
Содержание UNI-LIFT 5000 CLT PLUS
