Nussbaum UNI-LIFT 5000 CLT PLUS, Инструкция по эксплуатации и документация

Страница: 31 / 56

Operating Instruction and Documentation
UNI-LIFT 5000 CLT / Plus
- 31 -
8. Security check
The security check is necessary to guarantee the safety of the lifting during use. It
has to be performed in the following cases:
1. Before the initial operation, after the first installation
Use the form “First security check before initiation”
2. In regular intervals after the initial operation, at least annually.
Use the form “Regular security check at least annually”
3. Every time the construction of that particular lift has been changed.
Use the form “Extraordinary security check”
The first and the regular security check must be performed by a competent
person. It is recommended to service the lift at this occasion.
After the construction of the lift has been changed (changing the lifting
height or capacity for example) and after serious maintenance works
(welding on carrying parts) an extraordinary security check must be
performed by an expert.
This manual contains form with a schedule for the security checks. Please us the
adequate form for the security checks. The form should remain in this manual after they
have been filled out. In the following there is a short description about special safety
devices.
9.Installation and Initiation
9.1 Installation of the automotive lift
You can choose between two installation places of the operating unit: The position of
the operating unit can be chosen in drive-in direction right or in drive-in direction left.
9.2 Regulations for the installation
• The installation of the lift is performed by trained technicians of the manufacturer or
its distribution partner. If the operator can provide trained mechanics, he can install
the lift by himself. The installation has to be done according to this regulation.
• The standard lift must not be installed in hazardous locations or washing areas.
• Before installation a sufficient foundation must be proved or constructed.