Nussbaum POWER LIFT HF 7000 Скачать руководство пользователя страница 37

Страница: 37 / 76

OPI-POWER LIFT HF 7000-8000-V1.0-EN

Adjusting of the latch

5–8

8.3 Lift installation with inclined pipe exten-

sion (optional)

Extension

1. Riser extension is set on the existing riser. The open

side faces inwards.

2. Set to the desired height (from 100 mm to 900 mm

in 100 mm steps) depending on the ceiling height.

Guide the 4 hydraulic lines (fastened to the oper

ating column) upwards out of the riser.

3. Fasten the cover.

4. After setting up the lifting columns, lift the

cross-connection fastened to the operating col-

umn upwards and fasten to the opposite side.

The hydraulic lines are placed in the cross-con-

nection.

5. Guide the lines from above into the riser of the

opposite side and connect to the colour marked

positions.

6. Fasten the extension using the long screws after

the tensioning plate (A) has been placed.

8.4 Lifting arm assembly

Hang in the standard lifting arm and then place an

acid-free multi-purpose grease into the joint bolts in

each case from above into the hole and then insert

the enclosed locking ring.

The lifting arm bolts must be secured

on both sides as otherwise a reliable

connection is not given between the

lift rails and lifting arm.

8.5 Lifting arm adjustment

After assembly of the lift, the lifting arm may be

placed at the lowest position and become difficult

to move. There is the option of setting the set screw

so that the lifting arms can be moved more easily.

Set screw (lowest lifting rails)

Содержание POWER LIFT HF 7000













































































Результаты поиска

Содержание POWER LIFT HF 7000

Отзывы:

Похожие инструкции для POWER LIFT HF 7000

Бренды по названию

Популярные бренды

Nussbaum POWER LIFT HF 7000, Руководство по эксплуатации и книга учета инспекций

Результаты поиска

Содержание POWER LIFT HF 7000

Отзывы:

Похожие инструкции для POWER LIFT HF 7000

Бренды по названию

Популярные бренды