Operating Instruction and Documentation
Jumbo NT 3500
- 22
-
4. Safety regulations
Using automotive lifts for working the regulations of accident EN1493/Aug.98 (CEN/TC 98 „
Automotive lifts”) must be observed.
Especially the following regulations are very important:
• During working with the lift the operating instructions must be followed.
• The laden weight of the lifted vehicle mustn’t be more than 3000 kg for automotive lift.
• Only trained personnel over the age of 18 years old are to operate this lift.
• During lifting or lowering the vehicle it must be observed from the operator.
• Vehicles with low clearance or vehicles that are specially equipped should be pre tested to
ensure that they clear the lift ramp to avoid damage.
• Position the polymer supports as described of the vehicle manufacturer under the vehicle.
• If necessary use the ramps.
• It’s not allowed to stay under the lifted or lowered vehicle (except for the operator).
• It’s not allowed to transport passengers on the lift or in the vehicle.
• It’s not allowed to climb onto the lift or onto a lifted vehicle.
• The automotive lift must be checked from an expert after changes in construction or after
repairing carrying pads.
• It’s not allowed to start with operations at the lift before the main switch is switched off.
• It’s not allowed to install the standard-automotive lift in hazardous location.
• Check the centre of gravity of the vehicle if heavy parts (egg the motor) are removed.
• If heavy parts must be removed (motor) the centre of gravity will change. Secure the vehicle
before removing parts to avoid the possibility of the vehicle becoming insecure.
Содержание JUMBO NT 3500
