Nussbaum 4.40 ND, Инструкция по эксплуатации и документация

Страница: 16 / 64

Operating Instruction and Documentation
4.40 ND
- 16 -
7. Inspection and Maintenance
Before conducting maintenance work, preparations must be made to ensure that
during maintenance and repair work there is no risk to the safety of people working
on or around the lift and also that there is no risk of damage to equipment being used
on or around the lift.
To guarantee the utmost availability and to ensure that the lift remains functional, maintenance
work contracts are organised between our clients and their local retailers.
A service must be performed at regular intervals of 3 months through the operator in
accordance with following service manual. If the lift is in continuous operation or in a dirty
environment, the maintenance rate must be increased.
During daily operation the lift must be closely observed to ensure that it is functioning correctly.
In the case of malfunction or leakage the technical service must be informed.
7.1 Maintenance plan of the lift
• Before beginning any maintenance work isolate the power supply. Secure the main
switch (lock it). Secure the danger area around the automotive lift and secure the lift
against unintentional lowering.
• Clean and check the stripper of the cylinder.
• Clean the piston-rod using compressed air and examine for damages.
• Examine the energy chain. Clean it and examine the supply lines and the chain for
damages.
• Check the condition of ropes. If torn wires are discovered, the complete rope set must be
changed.
• Check all pulleys, bolts and bearings for wear.
• Check the condition of the electrical parts. (electrical button, main switch, lighting, cables,
plugs, electrical magnet.
• Check the condition of the plastic energy chain at the operating column.
• Clean and lubricate the moving parts and all lubricate nipples of the lift (hinge bolts,
sliding pieces, sliding surfaces) grease with a multipurpose liquid (e.g: Auto Top 2000
LTD. Agip).
• Clean and check the function of the ratchet, ratchet strip and the function and condition of
the magnetic. Grease the ratchet surface with a multipurpose lipid.
• Check all welded joints for cracks on the automotive-lift.
If any cracks are found on the lift cease use immediately. Switch-off and secure the main
switch (lock) and call the service partner.
• Examine the function and the condition of the ramps and the plastic roles.
• Examine the function and the condition roll over safety.