background image

 Operating Instruction and Documentation

 

                                                                                                                  4.40 ND 

 

- 3 - 

Foreword 

 

Nußbaum lifting systems are the result of long years experience in the automotive lifting industry. 
The high quality and the superior concept ensure reliability, a long lift lifetime and above all and 
economic business solution. 
To avoid unnecessary damage, injury or even death, read the operating instructions with care and 
observe the contents. 
Nußbaum lifts is not responsible for incidents involving the use of Nußbaum lifting systems for 
applications other than those for which they were designed. 
   

Otto Nußbaum GmbH & Co. KG  is not liable for any resulting damages. The user carries the 

risk alone.

 

 

Obligations of the user: 

-    

To observe and adhere to the operating instructions. 

-  

To follow the recommended inspection and maintenance procedures and carry out the    
prescribed tests. 

The operating instructions must be observed by all persons working with or around the lift.  

Above all chapter 4 “Safety Regulations“ is very important and must be closely adhered to. 

-  

In addition to the safety regulations stated in the operating instructions manual, the    
appropriate safety regulations and the operating procedures of the place of operation must 
also be considered.

 

 

Obligations of the operator: 

The operator is obliged to allow only those persons complying to the following requirements to work 
with or around the unit. 
-    

Persons being familiar with the basic regulations concerning labour safety and accident 
prevention and being trained to operate the particular unit. 

Persons having read and understood the chapter concerning safety and warning symbols.  

Persons using the lift are required to confirm that they have read and understood the chapter 
on safety and warning symbols by signing the appropriate form.

 

 

Dangers when operating the lift: 

Nußbaum-Lifts are designed and built according to technical standards and the approved 
regulations for technical safety. The use of Nußbaum lifts for purposes other than those for which 
they were designed, may result in injury or even death.

 

 
 
 
 
 
 
 
 
 
 

Содержание 4.40 ND

































































Отзывы: