Nuova Mondial Mec MANTA COMPAT 200 LX, Инструкция пользователя и руководство по обслуживанию, Страница: 24 / 87

Pagina 24 di 87
3007_R00_IT
5.5 Machine not powered
The machine not powered is:
1. Machine disconnected from the power supply, the disconnecting switch is on 0 or OFF
position;
2. Machine disconnected from the pneumatic supply (*); the feeding line is disconnected or the
on-off valve is closed;
3. Machine disconnected from the water supply (*) (cooling system)
(*)
Only for semi-automatic bridge saws.
5.6 Use expected
The machine is designed to work plates of marble, granite, natural stone, tiles and agglomerates.
The machine must not to be used for cutting wood, plastic, metal or similar materials, glass.
Therefore, Treatment of different materials can be not conformed to the features of the machine and
compromise the safety.
The machine
should NOT be used to effect operations on materials whose weight, shape or size are
not compatible with the structural features, leading to risks of loss of stability.
Machines can work in manual or semi-automatic mode with a single operator; in semi-automatic mode
the operator works only for checking the processing on the basis of the program; in manual mode the
operator must always be near the machine.
The machine described in this instructions manual allows to work manufactured articles and plates
whose sizes are indicated in the table “technical data” of the manual (chapter 7).
CONSIDERATIONS : while the length of the material is an obvious parameter related to the length of
the machine, the width and the height are parameters the operator must always consider to avoid
danger
of loss of stability with consequent bad working.
Some operations such as loading and unloading of materials, unless using lifting devices, may require
the presence of two people as well some adjustment, repair and cleaning operations.
The machine is expected to work in an industrial place.
The electromagnetic environment is type A (industrial).
The Operator must always be informed on the working way of the machine by means of:
 User instructions
And only if required by the manufacturer, as complementary activity:
 Training course about the machine (simulation)