Nuova Mondial Mec MANTA COMPAT 200 LX, Инструкция пользователя и руководство по обслуживанию, Страница: 14 / 87

Pagina 14 di 87
3005_R00_IT
3.1 Warranty
The warranty on the machine is valid 12 (twelve) months, except different terms reported on the sales
contract and it is limited to defects due to the fabrication and to material imperfections in standard
use/maintenance conditions.
The starting warranty date is the delivery date indicated on the invoice and considers clarifications
and exclusions reported here below, except different explicit agreements between both sides.
Limits of the Warranty
The warranty exclusively covers the defective parts depending on Manufacturer’s Responsibility and
includes replacement or repair of the defective part, excluded disassembly, assembly and shipment
charges. Replacement of the defective parts doesn’t require a renewal of the warranty period on the
whole machine.
Warranty of the components of third parties.
For all components supplied by third parties (electric, mechanical, electromechanical components) is
applicable the warranty term expected by the respective constructors.
Exclusions of the Warranty
Parts damaged during transport and transfers are excluded from the warranty as well as the ones
subject to normal usury and/or wasting due to weathering and environment, in any case all damages
depending on events not imputable to the normal working of the machine. Also Damages caused by a
missed, insufficient or wrong maintenance are excluded, as well as the ones caused by lack of skill,
improper use, use not allowed or not expected, by changes or repairs not authorized, by tampering or
intervention on the machine effected by not qualified staff and not complying with prescriptions
provided by the Manufacturer. Component Replacement is granted for free, if effected by the
reseller, after the replaced parts are returned to the office to be checked and considered effectively
defective. Labor costs are not included in the warranty. When the repair would require the presence of
a technician of the manufacturer, all travel expenses, room and board will be charged to the final
customer.
All transport costs are at charge of the buyer.
Nobody is allowed to change the warranty terms or issue other ones, oral or written, without the
written permission of the manufacturer Nuova Mondial Mec Srl
Checking at the delivery
It is necessary to check the machine when delivered controlling particularly the following points:
• Alignment of the flat surfaces
• Integrity of the guide bars
Good condition:
• of the electric parts and their good efficiency
• of the raise/fall handwheels (where present)
• of the adjustment and blocking devices of the stops
• of the various protections
• You are suggested not put anything on the table of the machine
These different checkings allow to formulate, as appropriate, the reserves immediately on the delivery
note and in accordance with law for the carrier on one side, and by registered mail on the other side.