Nuova Mondial Mec MANTA COMPAT 200 LX, Инструкция пользователя и руководство по обслуживанию, Страница: 21 / 87

3007_R00_IT
Pagina 21 di 87
5.1 Main Safety Warnings
Even if the installation is effected by the Manufacturer or by authorized Technicians, this
documentation must be read before any following operation, in any case.
Check that the handbook contains all sheets listed on the Summary inserted at the beginning, and
immediately communicate to the Manufacturer the eventual lack or illegibility, even partial, of one of
them.
In this case, consult the Manufacturer before effecting any operation on the machine.
The operators in charge of moving, installation, use, maintenance and demolition of the
machine, must read the instructions paying particular attention to the general safety
regulations and to the execution modes contained in sections relative to operations of their
competence.
This chapter describes the general safety regulations to be observed during any operation performed
on the machine. The intervention procedures, described in the following chapters, must be carried out
respecting both the execution modes indicated, both the general safety regulations of this chapter and
the ones contained in the specific chapters of the units installed on the machine.
Respect the perimeter spaces indicated by the Manufacturer during installation, use and
maintenance in consideration of all work surrounding activities. The realization of this
requirement should be made also in compliance with applicable laws on safety at work
.
5.2 Types of Operators and Skill Levels
The operators authorized by the Manufacturer to intervene on the machine are the following:
Operator driving the machine
Authorized and trained Person chosen among the ones who have requirements, skills and necessary
information to use and monitorize the machine, to start and reset the production.
Mechanical Maintenance Engineer
Qualified technician able to drive the machine in normal conditions, to make it work in safety mode
suspended, to intervene on mechanical and pneumatic parts in order to effect all adjustments,
maintenance intervention and necessary repairs.
He is not qualified to intervene on electrical equipment.
Electric Maintenance Engineer
Qualified technician able to drive the machine in normal conditions, to make it work in safety mode
suspended; he is in charge of all interventions of the electric system concerning adjustment,
maintenance and repair. He is not qualified to intervene on mechanical equipment.
Specialised Technician of the Manufacturer or authorized by himself
Technician chosen and authorized by the Manufacturer among the ones who have the skills to make
extraordinary maintenance interventions on the machine. He is qualified to intervene both on
mechanical and electric parts