Numatic TGB 6055, Оригинальное руководство пользователя

Страница: 7 / 56

7
T 01460 68600
Ensure that no metal objects come into contact with
battery terminals while the batteries are exposed.
When inserting the first fuse you may notice
a spark, this is normal.
Insert the Ignition key and
switch the machine on.
(Fig. A)
Use handle grip when
raising or lowering the
top waste-tank.
Fuse Location
Machine Set-up Guide
TGB 6055 CONTENTS
● 2 x Ignition Keys ● 2 x 40 Amp Fuse
(Battery) ● 1 x 30 Amp Fuse (Brush)
● 1 x 20 Amp Fuse (Vac)
● 1 x 2.5 Amp Fuse ● Maxi Fuse-puller
For Charger-less Model,
all the above plus:
● 1 x Charger Connector ● 2 x Charger
Connector Terminals
● 4 x Battery Terminal Connector
covers ● 1 x Fuse Holder
Lift top tank assembly to reveal battery
compartment, ensuring you use the handle
grip provided.
Fit battery fuse (contained in start-up pack)
into the battery fuse holder as illustrated.
(Fig. 1, 2, 3.)
Insert Key into ignition located on the
control panel (See below (Fig. A)
NOTE: Wear suitable gloves when
inserting fuses.
Using the control handle with both hands,
slowly push the machine off the pallet.
When the machine is removed and in a safe position,
release the control handle.
Note: Do not pull the RED trigger handle while in
transport mode (Fig. B)
During vehicular transportation ensure the product
is secured to avoid unnecessary movement.
PLEASE READ BEFORE COMMENCING ANY OPERATION AFTER THE REMOVAL OF ALL
THE PACKAGING, CAREFULLY OPEN AND CHECK THE CONTENTS.
! !
B
A
1 2 3