background image

 

 

 

5.2.3 Coolant ............................................................................................................................ 25 

5.3 Manual Start-up....................................................................................................... 26

 

5.4 Automatic Start-up .................................................................................................. 27

 

5.5 During Operation .................................................................................................... 27

 

5.6 Stopping Generator under Manual Operation Mode ............................................... 28

 

5.7 Stopping Generator under Automatic Operation Mode .......................................... 28

 

5.8 Protection ................................................................................................................ 28

 

5.8.1 Displaying alarm signals ................................................................................................. 28 

5.8.2 Warnings ......................................................................................................................... 29 

5.9 Shutting Down the Generator ................................................................................. 30

 

5.10 Lifting and Transporting ....................................................................................... 31

 

5.11 Overnight Storage ................................................................................................. 31

 

5.12 Long-term Storage ................................................................................................ 31

 

6. Maintenance .................................................................................................... 32

 

6.1 Periodic Maintenance Schedule .............................................................................. 32

 

6.2 New Machines ........................................................................................................ 32

 

6.3 Air Cleaner .............................................................................................................. 33

 

6.3.1 Clean air filter element .................................................................................................... 33 

6.3.2 Change air filter element ................................................................................................. 33 

6.4 Engine Coolant ........................................................................................................ 33

 

6.5 Engine Oil and Oil Filter ......................................................................................... 34

 

6.5.1 Change engine oil ............................................................................................................ 34 

6.5.2 Change oil filter ............................................................................................................... 34 

6.6 Fuel Filter ................................................................................................................ 35

 

6.6.1 Drain water / sediment in the fuel filter .......................................................................... 35 

6.6.2 Change fuel filter ............................................................................................................. 35 

6.7 Troubleshooting ...................................................................................................... 36

 

Содержание Nugen S150PS








































Отзывы: