Nugen Nugen S150PS Скачать руководство пользователя страница 34

Страница: 34 / 39

OPERATOR & MAINTENANCE MANUAL

6.3 Air Cleaner

6.3.1 Clean air filter element

①

Loosen clips in the air cleaner and remove the dust cap.

②

Remove the air filter element containing a primary filter and a safety filter.

③

Loosen the safety filter from the primary filter.

④

Use compressed air to the safety filter and primary filter from inside.

⑤

Use a clean cloth to wipe the filter sealing surface and the inside of the outlet tube.

⑥

Reinstall the air cleaner in the reverse order.

6.3.2 Change air filter element

①

Loosen clips in the air cleaner and remove

the dust cap.

②

Remove the air filter element.

③

Loosen the safety filter from the primary filter.

④

Change the primary filter.

⑤

Reinstall the air cleaner in the reverse order.

Caution:



Do not remove the air cleaner while operating the generator or immediately after

stopping the machine.



Do not start the engine after the air cleaner is removed. The backfire can cause

serious burns.



Change the primary filter every 250 hours or as required and safety filter every 500

hours or as required.

6.4 Engine Coolant

Change coolant

①

Open the radiator drain ball valve, located on the
side of the generator base tank, and drain
coolant.

②

After draining, close the drain ball valve.

③

Remove the coolant inlet cap.

④

Remove the radiator cap.

⑤

Fill new coolant into the radiator as required.

⑥

Close the radiator cap and coolant inlet cap.

Содержание Nugen S150PS








































Результаты поиска

Содержание Nugen S150PS

Отзывы:

Похожие инструкции для Nugen S150PS

Бренды по названию

Популярные бренды

Nugen Nugen S150PS, Руководство по техническому обслуживанию оператора

Результаты поиска

Содержание Nugen S150PS

Отзывы:

Похожие инструкции для Nugen S150PS

Бренды по названию

Популярные бренды