NuEra 310HD series, Руководство администратора

Страница: 77 / 94

Administrator's Manual 6. Configuration File Parameters
Version 1.0.2 77 October 2009
6.2.4 Dialing
Table 6-5: Dialing Configuration File Parameters
Parameter Description
voip/dial_timeout Specifies the duration (in seconds) of allowed inactivity between dialed digits.
When you work with a proxy, the number you have dialed before the dialing
process has timed out is sent to the proxy as the user ID to be called. This is
useful for calling a remote party without creating a speed dial entry (assuming
the remote party is registered with the proxy).
voip/phone_number_ma
x_size The maximum length of shortcut numbers that you can enter and the
maximum number of digits that you can dial
voip/dialtone_timeout The maximum duration of the dial tone (in seconds) after which the dial tone
stops and a Reorder tone is played.
voip/warning_tone_time
out The maximum duration of the reorder tone (in seconds) after which the
reorder tone stops and a Howler tone is played.
voip/offhook_tone_timeo
ut The duration (in seconds) of the Howler tone. If the limit is exceeded, the
Howler tone stops. The Howler tone indicates that the phone has been left in
an off-hook state.
voip/unanswered_call_ti
meout Timeout before the phone automatically sends a Cancel message. When the
phone makes a call and the other side doesn’t answer, the phone sends a
Cancel after this timeout
voip/signalling/sip/digit_
map Enables the ISP to predefine possible formats (or patterns) for the dialed
number. A match to one of the defined patterns terminates the dialed number.
An ‘x’ in the pattern indicates any digit. ‘;’ separates between patterns. For
additional information, refer to Section
4.6.2 on page 49 .
voip/signalling/sip/numb
er_rules This parameter works in conjunction with the parameter
voip/signalling/sip/digit_map and enables translation of specific patterns to
specific SIP destination addresses. An ‘x’ represents any dialed digit. Each
backslash at the right side of the ‘=’ represents one of the dialed digits. For
additional information, refer to Section
4.6.2 on page 49 .
voip/dial_complete_key/
enabled Enables the feature for defining a key to indicated that dialing has completed.
Pressing the Dialing Complete Key (defined below) forces the phone to make
a call to the dialled digits even if there is no match in the dial plan or digit map.
ƒ
0 = Disable
ƒ
1 = Enable (default)
voip/dial_complete_key/
key Defines the Dialing Complete key. The default value is the pound (#) key.
voip/out_of_band_dtmf=
rfc2833 DTMF transport mode:
ƒ
Inband
ƒ RFC2833
ƒ ViaSIP
Automatic Dialling
voip/auto_dialing/enable
d Determines whether automatic dialing is enabled (i.e., phone number is
automatically dialed when you off-hook the phone).
ƒ
0 = Disable (default)
ƒ
1 = Enable
voip/auto_dialing/timeou
t Timeout (in seconds) before automatic dialing occurs after the phone is off-
hooked. When set to 0, automatic dialing is performed immediately.