NuEra 310HD series, Руководство администратора

Страница: 49 / 94

Administrator's Manual 4. Web-based Management
Version 1.0.2 49 October 2009
4.6.2 Configuring the Dialing Parameters
The dialing parameters can be configured in the ‘Dialing’ page, as described below.
¾
To define the dialing parameters:
1. Access the ‘Dialing’ page ( Configuration tab > Voice Over IP menu > Dialing ).
Figure 4-9: Dialing Page
2. Configure the parameters according to the table below, and then click Submit .
Table 4-2: Dialing Parameters Description
Parameter Description
Dialing Parameters
Dialing Timeout Specifies the duration (in seconds) of allowed inactivity between dialed digits.
When you work with a proxy, the number you have dialed before the dialing
process has timed out is sent to the proxy as the user ID to be called. This is
useful for calling a remote party without creating a speed dial entry (assuming
the remote party is registered with the proxy).
Phone Number Length The maximum length of shortcut numbers that you can enter and the
maximum number of digits that you can dial.
Enable Dialing Complete
Key When enabled, a specific key can be defined for the Complete Dialing key.
Pressing the Dialing Complete Key (defined below) forces the phone to make
a call to the dialled digits even if there is no match in the dial plan or digit map.
The default value is enabled.
Dialing Complete Key Defines the Complete Dialing key. The default value is the pound (#) key.
Note: This field only appears if you configure the parameter ‘Enable Dialing
Complete Key’ to “Enable”.
Dial Tone Timeout The duration of the dial tone, in seconds. If the limit is exceeded, the dial tone
stops and you hear a Reorder tone.