NuEra 310HD series, Руководство администратора

Страница: 21 / 94

Administrator's Manual 2. Hardware Setup
Version 1.0.2 21 October 2009
2.4.2 Wall-Mounting the Phone
You can mount the phone on a wall or wall plate. You need two screws (not supplied) to fit the
keyhole slots.
¾
To wall mount the phone:
1. On the wall or a wall plate, drill two holes with a distance of 3 15/16 inches (100 mm) apart.
2. Thread a screw into each hole with each head extending about 3/16 inch (5 mm) from the
wall or wall plate.
Figure 2-4: Wall-Mounting Dimensions
3. Connect the AC power adapter, LAN and PC cords and route them to go under the bracket.
4. Position the phone bracket so that the attachment tabs are aligned with the upper set of
attachment slots on the underside of the phone.
5. Insert the tabs into the attachment slots and slide the bracket up to secure the bracket.
6. Place the phone on the wall. When the phone bracket is correctly positioned the Display
screen face towards you.
7. If the Display screen faces toward the floor, the phone bracket is positioned for placing the
phone on a desk. Detach the bracket from the phone and reattach the bracket using the
alternate attachment slots.
8. Align the phone’s keyhole slots with the screws and slide the phone downward to secure it.
Figure 2-5: Wall-Mounting the Phone