NuEra 310HD series, Руководство администратора

Страница: 20 / 94

310HD IP Phone
Administrator's Manual 20 Document #: 299-13801
2.4 Mounting the Phone
The phone can be mounted in one of the following ways:
„ Desktop mounting (refer to Section 2.4.1 below)
„ Wall mounting (refer to Section 2.4.2 on page 21 )
2.4.1 Placing the Phone on a Desk
This section describes the procedures for placing the phone on a desk or flat surface and routing
the phone’s cables.
¾
To place the phone on a desk
1. Position the phone bracket so that the brackets attachment tabs are aligned with the lower
set of attachment slots on the underside of the phone.
2. Insert the tabs into the attachment slots and slide the bracket up to secure the bracket.
3. Place the phone on the desk. When the phone bracket is correctly positioned the Display
screen face towards you.
4. If the Display screen faces away from you, the phone bracket is positioned for mounting the
phone on a wall. Detach the bracket from the phone and reattach the bracket using the
alternate attachment slots.
2.4.1.1 Routing the Phones Cables
The phone provides grooves for routing the LAN, PC, and AC power cables to ensure
uninterrupted connections.
¾
To route the phone’s LAN and PC cables:
1. Plug the PC cable in the PC port.
2. Insert the PC cable in the allotted slot on the bracket.
3. Plug the LAN cable in the LAN port.
4. Insert the LAN cord in the allotted slot on the bracket.
¾
To route the phone’s power adapter cord:
1. Plug the adapter into the power jack.
2. Insert the power cord in the allotted slots of the bracket.
3. Plug the AC power adapter into the power outlet.