NuAire Xboxer xbc+ Ecosmart Connect Control, Руководство по установке

Страница: 39 / 52

39
21. 07. 20. Document Number 671954 Nuaire |
Western Industrial Estate
|
Caerphilly
|
CF83 1NA
| nuaire.co.uk
XBC+ with Ecosmart Connect (C) Control
Installation Manual
8.7.3 Setting Favourites
The “Favourite” screen displays a list of favourite objects. To add or
remove favourites:
• Navigate to the settings page.
• Select the right arrow six times to reach the View Config screen.
• Select the function tick box and favourite star.
• Select the home icon.
• Navigate to the network page.
• Select the appropriate controller.
• Navigate to the required object. See “Exposed BACnet Object List”
for a full list (pressing for 3 seconds on an object will display the
full name.)
• Select the star to turn it black.
• Navigate and select any other required favourites.
• When finished, navigate back to the View Config screen in the
settings section and remove the function tick.
Favourites can be removed by browsing the favourites page, selecting
an object and then selecting the trashcan. Favourites can be re-
ordered by uploading the favourite settings to a USB memory stick and
changing the order of the items in the favourites.csv file. This file can
then be downloaded back to the LCD.
Enable On
Fan Boost Off
Heat Boost Off
Trickle Mode Off
Name
Write ID
Description Status Function
53
54
Setting Favourites
Setting Passwords
Network Page Description Object Type Object ID
16 Room Air Temp AV 11296
16 CO2 Level AV 13980
16 Humidity AV 14297
16 Active Setpoint AV 14534
33 Enable MSV 10218
26 Time Schedule SCH 10496
27 Fan Speed Schedule SCH 17798
34 Fan Boost MSV 10240
30 Heat Boost MSV 10205
1 Fresh Air Temperature AI 10008
14 Software Setpoint AV 10309
8.7.4 Setting User Password
• Navigate to the settings page.
• Select the right arrow twice to reach the display settings screen.
• Change the user password a 4 digit number.
• The user password will now be requested each time a locked
object is written.
• The user password is also needed to exit the target page (when
the homepage is set to target).
8.7.5 Setting Service Password
• Navigate to the settings page.
• Select the right arrow twice to reach the display settings screen.
• Change the service password a 4 digit number.
• The service password will now be requested each time the settings
page is accessed.
Network Page Description Object Type Object ID
33 Enable MSV 10218
26 Time Schedule SCH 10496
27 Time Schedule SCH 10496
34 Fan Boost MSV 10240
30 Heat Boost MSV 10205
14 Software Setpoint AV 10309
8.7.6 Disable Writing Of Values
• Navigate to the settings page.
• Select the right arrow six times to reach the View Config screen.
• De-select the write tick box. All controller points are now read
only.
• A service password will need to be set to stop users re-enabling
the write function.
8.7.7 Allow Basic Values To Be Written By User
• Navigate to the settings page.
• Select the right arrow six times to reach the View Config screen.
• Select the function tick box and lock.
• Select the home icon.
• Navigate to the network page.
• Select the appropriate controller.
• Navigate to the required object. See “Exposed BACnet Object List”
for a full list.
• Select any values that need password protection. A black lock
indicates a locked value.
• When finished, navigate back to the View Config screen in the
settings section. Remove the Function tick and enable writing of
values.
• A user password will need to be set to stop writing of locked
values. It is recommended that all values are locked except the
following;
Backlight
Home Page
Service Password
User Password
Stand by
Stand by Timer
Stand-by-OFF
Target
0
0
Dark
0
Select Target Device