25
16.2 - ARRANGING the WOOD EFFECT
-
continued
e). Fit the Left Centre Wood Piece
by Locating the Lugs On the Underside
of the Wood as shown.
f). Fit the Right Centre Wood Piece by
Locating the Lugs On the Underside of
the Wood into the Recesses as shown.
g). Fit the Centre Wood Piece by
Locating the Lugs On the Underside
of the Wood into the Recesses
as shown.
Finally adjust the Wood Pieces to ensure they are located correctly and stable.
h). Before fitting the glass panel with the 5 special countersunk screws and screw driver provided, check the condition of the
glass and ensure it is free from cracks or chips.
NOTE: BEFORE FITTING THE GLASS PANEL IF A CONTEMPORARY TRIM IS TO BE FITTED THEN THE CURVED DÉCOR TRIM
WILL HAVE TO BE FITTED - SEE 15.1b
Most Important: Ensure it is clean and free of any finger marks.
