Nu-Flame Fenton Balanced Flue Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 34

Nu-Flame Fenton Balanced Flue Скачать руководство пользователя страница 12

12

The Installation Applications Options Are:

11.0 Installation details for Traditional Built Houses with Internal Brick Walls.

12.0 Installation Houses with Internal Timber Stud Walls with Fire Surround & Shelf Details.

13.0 Installation into Timber Frame Housing.

11.1 - FIRE SURROUND APPLICATIONS

If a fire surround is being used we supply a Cable Fixing System as Drill Fixing may result in cracking of the back panel, which may not
show until the fire has got hot and then cooled down over a number of operations.
If the fire is being fitted against a Masonry Wall then the Fires Fixing Brackets with Drill/ Rawlplug Fixing Must be used and Not the Cable
Fixing System. See the Wall Fixing and Cable Fixing Diagrams on Page 20.

Nu-Flame does not recommend the use of a 1 piece back panel as cracking can occur.

Nu-Flame will not accept responsibility for Cracked Back Panels due to Drill Fixing.

Standard Fireplace Construction & Shelf Details

Sections 11, 12 & 13 are for the various Installation Applications for

Traditionally Built Houses - Only one will apply.

For Timber Frame Houses refer to Section 13

! IMPORTANT NOTE !

The chosen installation should have been

predetermined and arranged before installing the fire.

Ensure you refer to the Section relevant to your requirement.

11. - TRADITIONAL PROPERTY WITH NON COMBUSTIBLE INTERNAL WALLS (e. g. Brick)
With or Without a Standard & Rebated Fire Surrounds, Back Panel or Slips.

MASONRY FIREPLACE ENCLOSURE WITH

FLUE HOLE POSITION & SIZE

3 PIECE FIRE SURROUND BACK PANEL

NOTE: With Fire Surround Applications with Cable Fixing System

It may be necessary to rebate the heads of the eyebolts.
NOTE: When Fitted Against a Masonry Wall the Fires Fixing Brackets

Cavity Sealed Off
100mm away from
Flue

Combustible Shelf
Minimum Height

Non Combustible
Minimum Height

Hearth

160mm Min
Dia Flue Hole.

3 Piece
Fire Surround Back
Panel.

160mm Min
Dia Flue Hole.

Plaster Board Cut
Back 25mm
Around Flue

Dry Lined Internal
Walls with Cavity

635mm
Min

Minimum Flat Area
Around Flue

Upstand 15mm Max

630mm
Min

«
...
10
11
12
13
14
...
»

Содержание Fenton Balanced Flue



































Отзывы:

Нет отзывов