NTI VEEMUX AUDIO VIDEO MATRIX SWITCH VIA CAT5
37
Administration
The Administration section provides links to pages for all configuration options in the VEEMUX switch. The administration
section is broken up into 8 topics:
System
Assign the switch name and serial port communication settings
Network
Assign all network settings for connection to LAN
Video Input Names
Assign port names to each cable connection from video sources for
easy reference
Video Output Names
Assign port names to each cable connection from display devices for
easy reference
Scanning Sequence
Assign dwell times for each input as it is assigned to each output’s
scanning sequence
DDC Options
Configure how each input will receive EDID information
Change Password
Change the password used to access the VEEMUX
Firmware
Update the firmware as new versions become available
System Configuration
On the System Configuration page, under Administration, fields are provided to assign a unique name to the VEEMUX, set the
baud rate for serial communications, the serial address to be used in RS232 commands, and to enable/disable fast switching.
Switch Settings
When the VEEMUX makes connection between the video source and the monitor, if the XTENDEX connected supports automatic
skew adjustment (1000 foot extenders only) the VEEMUX will allow for this adjustment in the timing of the connection. To omit
this adjustment and more rapidly connect the video source to each monitor, apply a checkmark in the box for “Force Fast
Switching”. For more details on skew adjustment, see the manual for the 1000 foot NTI extenders (MAN060) supplied with your
extenders.
After applying the desired settings, press “
Save
” to finish.
Figure 15- System Configuration page
