NTI VEEMUX AUDIO VIDEO MATRIX SWITCH VIA CAT5
22
4. During the installation, your PC will assign a COM port number to the USB port attached to the VEEMUX. You will need to
identify the COM port number assigned. This information can be viewed in your Device Manager list (below) if you didn’t take
note of it during installation.
Figure 9
- COM port assigned to VEEMUX
Using the USB Console Port
The virtual COM port will be used to enable serial control over the VEEMUX (see RS232 control on page
23
). When you open a
terminal program or the Matrix Switcher
’
s Control Program (page
26
), you will need to configure the program to use the correct
COM port (see Figure 9 and Figure 10 ).
Figure 10- Configure COM port in Matrix Switcher's Control Program
COM Port
Assignment
