NTI Trinity Lx 150, Инструкция по установке и эксплуатации

Страница: 89 / 104

Lx Series Installation and Operation Instructions
│
Trinity Lx
89
Table 17-3 Hold and Lockout Codes
Code Description Note
58
Internal fault: HFS shorted to IAS Lockout
59
Internal fault: Mux pin shorted Lockout
60
Internal fault: HFS shorted to LFS Lockout
61
Anti short cycle Hold
62
Fan speed not proved Hold
63
LCI OFF Hold
64
PII OFF N/A
65
Interrupted Airflow Switch OFF Hold
66
Interrupted Airflow Switch ON Hold
67
ILK OFF Hold
68
ILK ON N/A
69
Pilot test hold Hold
70
Wait for leakage test completion Hold
71
Input power frequency mismatch Lockout
72-77
RESERVED
78
Demand lost in run Hold
79
Outlet high limit Hold
80
DHW high limit Disabled
81
Delta T limit Hold / Lockout
82
Stack limit Lockout
83
Delta T exchanger/outlet limit Disabled
84
Delta T inlet/exchanger limit Disabled
85
Inlet/Outlet inversion limit (See Table 17-1) Hold
86
Exchanger/outlet inversion limit Disabled
87
Inlet/exchanger inversion limit
Disabled
88
Outlet T-Rise limit (See Table 17-1) Lockout
89
Exchanger T-rise limit Disabled
90
Heat exchanger high limit Disabled
91
Inlet sensor fault Hold
92
Outlet sensor fault Hold
93
DHW sensor fault Hold
94
Header sensor fault Hold
95
Stack sensor fault Hold
96
Outdoor sensor fault Hold
97
Internal fault: A2D mismatch Lockout
98
Internal fault: Exceeded VSNSR voltage tolerance Lockout
99
Internal fault: Exceeded 28V voltage tolerance Lockout
100
Pressure sensor fault Hold
101
Exchanger sensor fault Disabled
102-104
RESERVED
105
Flame detected out of sequence Hold / Lockout
106
Flame lost in MFEP Lockout
107
Flame lost early in run Lockout
108
Flame lost in run Lockout
109
Ignition failed Lockout
110
Ignition failure occurred Hold
111
Flame current lower than WEAK threshold Hold
112
Pilot test flame timeout Lockout
113
Flame circuit timeout Lockout